Mantis Sub Housing for Insta360 Pro 2
Mantis Sub is the first underwater housing for the Insta360 Pro and Pro2 cameras, allowing professionals to shoot 8K stereoscopic (3D) footage underwater using a production camera for the first time. Manufactured in lightweight aluminum it has a depth rating of 90 meters. It features clean zenith and nadir for perfect 360 view, ports for hydrophones, ethernet live-streaming and mounting points for rigging and lighting.
Mantis Sub is the first underwater housing for the Insta360 Pro and Pro2 cameras, allowing professionals to shoot 8K stereoscopic (3D) footage underwater using a production camera for the first time. Manufactured in lightweight aluminum it has a depth rating of 90 meters. It features clean zenith and nadir for perfect 360 view, ports for hydrophones, ethernet live-streaming and mounting points for rigging and lighting.
Mantis Sub is the first underwater housing for the Insta360 Pro and Pro2 cameras, allowing professionals to shoot 8K stereoscopic (3D) footage underwater using a production camera for the first time. Manufactured in lightweight aluminum it has a depth rating of 90 meters. It features clean zenith and nadir for perfect 360 view, ports for hydrophones, ethernet live-streaming and mounting points for rigging and lighting.
The Mantis is a 'smart' housing, with an on-board processor and controller to trigger record and stop functions, change recording states, and monitor temperature and vacuum status. A 7-colour LED lamp allows the operator to see the camera state at a glance. Camera settings and a detailed log of the unit’s vitals are accessible wirelessly via an app. On board lithium-ion batteries extend the recording time of the camera. The Mantis is live-streaming-capable and ROV-ready with a detailed integration guide.
Price in USD excl. shipping of US$ 414 and tax/duty.
Supplied in protective hard case with custom foam cutout.
Pro2 cameras available through Insta360. Use this link and receive a free battery and charging station.
“The Mantis Sub changed everything for me.
From quality to functionality to efficiency …
this product is not a compromise. It's what
is needed to create professional
underwater 360 footage.”
— Dimitri Bintein, underwater VR content producer
FEATURES
Clean nadir and zenith—full 3D/360 view, no black discs/occlusions
10mm port for observing Insta360 display
Wifi for control, setup (surface), web interface to controller for remote control and log files
Underwater on/off, start/stop
Support for hydrophone in top bulkhead (M14 or M16)
Support for Ethernet and HDMI connection through bottom M16 bulkhead for live-streaming / remote control
Battery pack to extend runtime of Insta360 Pro
Vacuum valve installed as standard
SPECIFICATIONS
Supported camera: Insta 360 Pro/Pro 2 (not included)
Material: Anodised aluminium
Colour: Black
Safe depth rating: 90m / 300ft
Buoyancy: 300g/10oz positive in saltwater, 200g/7oz positive in freshwater
Dimensions (with domes): 250mm high, 218mm wide, 198mm depth
Dimensions (without domes): 250mm high, 162mm wide, 144mm deep
Weight: 2.2kg without camera or batteries, 3.7kg with camera, batteries
External controls: Power on/off, record, stop, switch controller
Batteries: 3x 18650 (to power electronics and increase camera battery capacity)
Run time: 12 hours standby, 90 minutes continuous recording
BULKHEADS
Top: 2x M14, 1x M16
Bottom: 1x M16
MOUNTING POINTS
Top: 15x 1/4-20 UNC, 9mm spacing
Bottom: 16x 1/4-20 UNC, 9mm spacing
Front: 1x 3/8-16 UNC
Back: 1x 3/8-16 UNC
INCLUDED
6x domes, mounted
1x 2mm hex key for domes
1x O-ring kit
1x O-ring grease
2x Anodes, installed
1x Nauticam M14 Vacuum Valve II (push-button release) installed as standard
1x M14 port plug, installed
2x M16 port plug, installed
1x Camera tray with battery shuttle and Mantis electronics
1x Pelican Storm IM2275 case (suitable as carry-on cabin baggage), with custom foam
2x 2dBi SMA stub antennas (replace Insta360 standard to fit inside housing)
1x Ethernet cable
NOT INCLUDED
Camera (Insta360 Pro or Pro2)
SD/mSD cards for Pro/Pro2
Li-ion batteries (3 x 18650)
Battery charger for 18650 batteries
RECOMMENDED THIRD PARTY ACCESSORIES
Insta360 Pro2
SmallRig Cheese Plate 1598
Cinebags Square Grouper Bag
Ambient Hydrophone ASF-G M14 with cable ASFG35DC
Nitecore i4 charger + 3x 18650 Batteries
Benro MAD49C Monopod with additional 1” Ball mount with 3/8” thread.
DOWNLOAD DOCUMENTS
Mantis Sub Quick Start Guide
Mantis Sub Manual
Mantis Sub Integration Guide (for ROVs, submarines, fish tanks etc.)
Sample Videos
Have a look at our YouTube channel to view some more of our sample recordings in 8K and 3D. These were all shot on an Insta360 Pro2 in Mantis Sub housing and stitched in Insta360Stitcher without further post-processing.
Support
Head to the Support page to find manuals, software and 3D-printable designs to help you get the most out of your Mantis Sub housing.
Additional Resources
Would you like to learn more about how to shoot and edit underwater 360 video:? Here are some free articles from our Mantis Academy to get you started:
