Mantis Spray Housing

US$11,999.00
Currently out of stock

Custom order - lead time approx. 6 weeks.

The Mantis Spray was built to support 8K stereoscopic VR production in wet or dangerous conditions—specifically for mounting on AC75 America’s Cup foiling yachts. It is a weatherproof housing - not a waterproof housing - made from lightweight Nylon and incorporating a cooling fan. Designed for sheets of spray but not submersion. Please contact us if you require a version milled from aluminum.

Add To Cart

Custom order - lead time approx. 6 weeks.

The Mantis Spray was built to support 8K stereoscopic VR production in wet or dangerous conditions—specifically for mounting on AC75 America’s Cup foiling yachts. It is a weatherproof housing - not a waterproof housing - made from lightweight Nylon and incorporating a cooling fan. Designed for sheets of spray but not submersion. Please contact us if you require a version milled from aluminum.

Custom order - lead time approx. 6 weeks.

The Mantis Spray was built to support 8K stereoscopic VR production in wet or dangerous conditions—specifically for mounting on AC75 America’s Cup foiling yachts. It is a weatherproof housing - not a waterproof housing - made from lightweight Nylon and incorporating a cooling fan. Designed for sheets of spray but not submersion. Please contact us if you require a version milled from aluminum.

Price in USD excl. shipping and tax.
Supplied in protective hard case
Pro2 available direct through Insta360. Use this link to receive a free battery and charging station.

FEATURES

Clean nadir and zenith—full 3D/360 view, no black discs/occlusions
10mm port for observing Insta360 display
Wifi for control, setup (surface), web interface to controller for remote control and log files
Wifi for control, setup, compatible with FarSight
Support for top-mounted microphone with USB pass-through to Insta360 Pro
Support for Power, Ethernet, and HDMI connection through base
Powerful internal cooling fan

SPECIFICATIONS

Supported camera: Insta 360 Pro/Pro 2 (not included)
Material: Nylon. Contact us for other options.
Dimensions (with domes): 295mm high, 218mm wide, 198mm depth
Dimensions (without domes): 295mm high, 162mm wide, 144mm deep
Weight: 1.3kg without camera, 2.8kg with camera, batteries
Button controls: Power on/off, record, stop, switch controller

BULKHEADS

Front: 1x M16
Back: 1x M16

MOUNTING POINTS

Top: 1x 1/4-20 UNC, center
Bottom: 6x 1/4-20 UNC, 18mm spacing
Front: 1x 3/8-16 UNC
Back: 1x 3/8-16 UNC

INCLUDED

6x domes, mounted
1x 2mm hex key for domes
1x O-ring kit
1x O-ring grease
1x Camera tray with 3x Ethernet switch and Mantis electronics
1x Pelican case with custom foam
2x 2dBi SMA stub antennas (replace Insta360 standard to fit inside housing)

NOT INCLUDED

Camera (Insta360 Pro Or Pro2)
SD/mSD cards

RECOMMENDED THIRD PARTY ACCESSORIES

Insta360 Pro2
SmallRig Cheese Plate 1598

DOWNLOAD DOCUMENTS

Mantis Spray Manual
Mantis Sub Quick Start Guide

Mantis Sub Integration Guide (for boats etc.)

Support

Head to the Support page to find software and 3D-printable designs to help you get the most out of your Mantis Sub housing.

Additional Resources

Would you like to learn more about how to shoot and edit underwater 360 video:? Here are some free articles from our Mantis Academy to get you started:

Mantis Sub full dome set
US$300.00